Aluminum Hood Liners
Shipping is FREE for all products!
Our hood liners are made with our exclusive FATDAMP® Acoustical foam, 3/4" thick, with a reinforced aluminum foil facing and a 4 mil nominal acrylic PSA backing. Our foam is a acoustical grade open cell, flexible, modified poly ether polyurethane foam designed for optimal sound absorption over a broad frequency range. It has excellent resistance to heat, moisture and non aromatic petro chemicals. Our hood liners are larger than dynamat hood liners as well as more effective.
Benefits & Features
- Stop Engine Noise
- Stop Heat from destroying your paint
- Heat Absorption up to 98%
What's Included In Your Liner Package
- 54" X 34" eXtreme Acoustical Liner W/Aluminum Facing
- Free FatMat Decal
- Installation Instructions
- Liner Kit Includes
-
2 Sheets 18in X 54in
-
Free FatMat Roller For Easy Installation
-
Free FatMat Handy Cutting Knife
-
| Liner Specifications | Metric | English |
| Density | 26 | 1.6 |
| Cell Size ppcm (ppi) | 25-3 | 65-5 |
| Tensile Strength KPA (psi) | 138 | 20 |
| Tear N/M (lb/in) | 450 | 2.0 |
| Elongation % | 110 | 110 |
| Compression Set % (22hr @ 90%) | 10 | 10 |
| Ait Permeability: m3/min. (scfm)(@ 25.4mm thickness | 0.011 - 0.042 | 1.0 - 4.0 |
| Thermal Conductivity K. Cal/hr m2, 0C/m(BTU/hr, ft2, 0F/in) | 48 | .25 |
Flame Resistant
Meets UL 94 HBF, MVSS - 302, SAE J-369b
Service Temp
43*(-45*F) to 100*C(212*F) continuous up tp 138*(280*F) intermittent
Humidity Resistant
Excellent; no significant decrease in tensile strength or elongation after 5 hours of steam autocave at 250*F (121*C) per ASTM D3574-86, Test J
Chemical Resistant
Excellent; no significant decrease in strength after 4 weeks immersion in common solvents, alkalies, acids and water